====== ReadyNAS Duo Hardware Listing ====== This is the output of ''lshw'' on a ReadyNAS Duo... readynas readynas
description: Computer
core
description: Motherboard
physical id: 0
memory
description: System memory
physical id: 0
size: 221MB
cpu
physical id: 1
bus info: cpu@0
usb:0
description: USB Controller
product: VT82xxxxx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 17
bus info: pci@00:17.0
version: 62
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master cap_list
configuration:
driver=uhci_hcd
resources:
ioport:5c001000-5c00101f
irq:27
usbhost
product: UHCI Host Controller
vendor: Linux 2.6.17.14ReadyNAS uhci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 2.06
capabilities: usb-1.10
configuration:
driver=hub
maxpower=0mA
slots=2
speed=12.0MB/s
usb:1
description: USB Controller
product: VT82xxxxx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 17.1
bus info: pci@00:17.1
version: 62
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master cap_list
configuration:
driver=uhci_hcd
resources:
ioport:5c001020-5c00103f
irq:27
usbhost
product: UHCI Host Controller
vendor: Linux 2.6.17.14ReadyNAS uhci_hcd
physical id: 1
bus info: usb@3
logical name: usb3
version: 2.06
capabilities: usb-1.10
configuration:
driver=hub
maxpower=0mA
slots=2
speed=12.0MB/s
usb:2
description: USB Controller
product: USB 2.0
vendor: VIA Technologies, Inc.
physical id: 17.2
bus info: pci@00:17.2
version: 65
width: 32 bits
clock: 33MHz
capabilities: ehci bus_master cap_list
configuration:
driver=ehci_hcd
resources:
iomemory:5c010000-5c0100ff
irq:27
usbhost
product: EHCI Host Controller
vendor: Linux 2.6.17.14ReadyNAS ehci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 2.06
capabilities: usb-2.00
configuration:
driver=hub
maxpower=0mA
slots=4
speed=480.0MB/s
network
description: Wireless interface
physical id: 1
logical name: eth0
serial: c0:3f:0e:bd:81:01
size: 100MB/s
capacity: 1GB/s
capabilities: ethernet physical wireless tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegociation
configuration: speed
autonegociation=on
broadcast=yes
driver= Netgear Padre Gmac Driver
driverversion=V2.0.0.0-k1
duplex=full
firmware=4.00b2-p2-T1
ip=192.168.1.106
link=yes
multicast=yes
port=twisted pair
=100MB/s